Porsche PADM storing oplossen: versterkte sensor voor 981, 982, 991 en 718

How to Fix Porsche PADM Faults: Upgraded PADM Sensor for 981, 982, 991 and 718 Models

Porsche PADM Sensor – The Affordable Solution for PADM Failures (911 / 718 / 981 / 982 / 991)

Are you experiencing a “PADM Disabled” warning on your Porsche 981, 982, 991, or 718? You are not alone. The Porsche PADM sensor is known to be sensitive to heat, vibration, and pressure, often resulting in expensive repairs.

Fortunately, there is a much simpler, more affordable, and more durable solution: the upgraded and calibrated Porsche PADM Sensor.

At Zuffenparts, you can now find the aftermarket sensor designed to permanently solve this common Porsche failure.

What Does This Porsche PADM Sensor Fix?

This sensor solves the most common PADM faults, including:

  • PADM warning light on the dashboard
  • “PADM Disabled” message
  • Fault code 001013 – Sensor Signal Short to Ground (Left)
  • Fault code 001023 – Sensor Signal Short to Ground (Right)

Want to read experiences from other Porsche owners? Check out these discussions:

Rennlist – PADM fault repair
718 Forum – PADM logic & maintenance

Watch the video explanations:

YouTube: Porsche PADM problem and replacement

https://youtu.be/6-a-grvoTzc?si=7Y7AQ9L70hdb6RIK
https://youtu.be/TqU5tYP7uTM?si=8HK9mN7vrHpMbZ0x

Why Does the Original Porsche PADM Sensor Fail?

The original Porsche sensor is internally bonded with adhesive. Due to high temperatures, engine vibrations, and pressure changes inside the engine bay, the measurement chip can eventually become loose.

The result:

  • Incorrect sensor readings
  • Disabled PADM functionality
  • Reduced performance in Sport / Sport Plus modes
  • Reduced driving comfort and sometimes rough idle behavior

Many dealers immediately recommend replacing the complete PADM mount — with costs ranging from €1,500 to €3,000 plus labor.

However, this is often unnecessary.

In approximately 95% of cases, only the sensor itself has failed, and replacing the sensor is the correct solution.

Our PADM Sensor: A True Upgrade Over OEM

Our reinforced and calibrated sensor has been engineered to eliminate the original weak point permanently.

Key Improvements:

✔ Mechanically Secured Chip

No adhesive.

The chip is mechanically fixed in place, eliminating the risk of becoming detached due to heat and vibration.

✔ CNC-Machined Aluminum Housing

Better resistance against:

  • High temperatures
  • Pressure
  • Vibrations

Ideal for performance driving and warmer climates.

✔ Plug-and-Play Installation

  • No coding required
  • No software modifications
  • No complicated installation

Simply replace, connect, and drive.

✔ OEM-Level Calibration

Extensively tested across multiple Porsche models to ensure accurate factory-level specifications.

Important Information Before Ordering

Please check the compatibility table on the product page before ordering.

Every vehicle uses two sensors (left + right). When experiencing a PADM failure, we recommend replacing both sensors.

  • 2-year warranty
  • Worldwide shipping (free, except remote areas)
  • Shipping via YunExpress / FedEx / UPS / DHL

Customs duties and VAT charges are not included. Some countries may request a VAT number after payment.

Symptoms of a Faulty PADM Sensor

Do you recognize one or more of the following symptoms? The sensor is likely the cause:

  • “PADM Disabled” or “PADM Fault” warning message
  • Unstable handling in Sport or Sport Plus mode
  • Recurring Check Engine Light (CEL)
  • Engine mount feels too stiff or too soft
  • Rough idle or increased vibrations
  • Fault codes 001013 / 001023

What Does PADM Actually Do?

PADM = Porsche Active Drivetrain Mounts

This system continuously adjusts the stiffness of the engine mounts:

  • Comfortable during normal driving
  • Maximum stability during acceleration and aggressive cornering

The sensor accurately measures drivetrain movement. When the sensor fails, the control module receives incorrect information and disables the PADM system as a safety precaution.

Save Thousands in Repair Costs

Where Porsche dealerships often immediately recommend replacing the complete PADM mount, this is usually unnecessary.

With this upgraded aftermarket sensor, you can:

  • Clear the fault codes
  • Restore PADM functionality
  • Extend the lifespan of your PADM system
  • Save up to €2,000

Order Your Porsche PADM Sensor from Zuffenparts

Reinforced, calibrated, plug-and-play, and more affordable than OEM.

The ultimate solution for 981 / 982 / 991 / 718 Porsche PADM failures.

Back to blog